| Author [expand] |
[Modern View]
|
| TnVineyard
03-22-2009 15:55:23
75.254.244.119
20316
|
The rear end in our 450 sounds rough....I've been told to run straight Hydralic fliud in the rear end the whole time I've had this thing. Is that right? or should it be a heavier oil? Please pass on the wisdom, because I hunted up a manual on this thing and its outragous...Thanks in Advance
|
| [Reply] [Send Email] |
|
| Ed Pap
03-29-2009 15:56:30
74.42.203.173
20342
|
|
Re: Case 450 Dozer in reply to TnVineyard, 03-22-2009 15:55:23
|
| Hello,I don't think I ever saw a case 450 that takes 90 wt in the trans finals yes but not the trans. if you have a small hyd pump on the right front side of your engine with a hose going to a steel filter/screen housing then it takes TCH or hyd/trans oil.I hope i am not too late.Good Luck Ed
|
[Reply] [Send Email] |
|
| marlowe
03-24-2009 17:36:50
12.213.112.38
20322
|
|
Re: Case 450 Dozer in reply to TnVineyard, 03-22-2009 15:55:23
|
| gear oil 120-140 0r 80-90
|
[Reply] [No Email] |
|
| Jerry/MT
03-22-2009 17:07:31
206.183.116.129
20317
|
|
Re: Case 450 Dozer in reply to TnVineyard, 03-22-2009 15:55:23
|
| The manual price won"t look outrageous if you were supposed to run some other type of fluid in it. Me thinks that it should be a GL-4 or 5 type gear oil, not hydraulic fluid. I"m not that familiar with the specific model you have but most of the crawler machines I am familiar with had separate hydraulic systems from the final drives.
|
[Reply] [No Email] |
|
| TnVineyard
03-22-2009 17:34:36
75.254.50.183
20318
|
|
Re: Case 450 Dozer in reply to Jerry/MT, 03-22-2009 17:07:31
|
| Good, I've been wondering about that...yup a rearend veruses a manual...I see your piont..Thanks
|
[Reply] [No Email] |
|
