Featured Photo Click to View The Market Tractor Parts Tractor Manuals Classified Ads Tractor Shoppe Features Discussion Forum Archives Tractor Photos Implement Photos Combine Photos Information Model Profiles Safety Issues Manufacturers Reading Room Miscellaneous Contact Us Tractor Shoppe Antique Tractors Classic Trucks Kountry Life YT Forums Discount Parts [Home]

Discussion Forum Topic: Re: MF50 power steering cylinder, I give! [Show Entire Topic] [Return to Forum] Author [expand] [Modern View] jogl 04-16-2009 03:47:25 209.216.155.96 20389 Report to Moderator It sounds like you have the same valve as on my 175. If so you can try the following: 1) Pull the seal out of the rod end of the control valve. 2) With your dental tools, or two very small flat screw drivers, or some ground down nails (like me) reach in along the valve stem and remove the spiral clip that is holding the return spring assembly in. It takes a little fiddling, but is easily done. Once the spiral clip is out the whole valve stem assembly will slide out of the rod end of the valve housing. No need to screw the valve stem apart at all. 3) The two O rings and the seal that you need to replace are standard sizes that you can get anywhere, even at the AGCO dealer. Most of the discussion on MF 35, 50, 65 series is in the Massey Harris and Massey Ferguson forum. You may want to search around there for more MF 50 info. Good Day, JP. [Reply]  [No Email] [Show Entire Topic]   [Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply] Hop to: Another Forum Tractor Talk Tool Talk Restoration Tips Paint & Bodywork Implement Alley Tractor Transporting Allis Chalmers Case Combines Crawlers Farmall & IH Ford Ford 9N,2N & 8N Fordson John Deere MH & MF Harry Ferguson Minneapolis Moline Oliver & Cockshutt Garden Tractors Orphans Stationary Engines Today's Tractors Memorabilia Tractor Tales Using Your Tractor Tractor Pulling Site Comments Test Forum Buyer Seller Feedback Kountry Life Classic Trucks