Featured Photo Click to View The Market Tractor Parts Tractor Manuals Classified Ads Tractor Shoppe Features Discussion Forum Archives Tractor Photos Implement Photos Combine Photos Information Model Profiles Safety Issues Manufacturers Reading Room Miscellaneous Contact Us Tractor Shoppe Antique Tractors Classic Trucks Kountry Life YT Forums Discount Parts [Home]

Modern Tractor Discussion Board Topic: Re: 8360 rc [Show Entire Topic] [Return to Forum] Author [expand] [Modern View] cull 11-02-2009 15:49:35 78.143.134.106 20951 Report to Moderator thanks for the info. i put two new pots in it and no joy so i took cover off the top of the box and the bottom shaft was not moving and was stuck forward so i put in middle and there is no resistance when moveing it i think it might be something to do with the piston or the selector/synchro i will have to lift the cab because it was starting to grind between b and c a good wile ago. if you use the foot clutch it was ok. i don't mind having to rip it because it is a good tractor with high hours and no major break downs [Reply]  [No Email] Blue Buddy 11-02-2009 16:06:54 67.220.45.221 20952 Report to Moderator Re: 8360 rc in reply to cull, 11-02-2009 15:49:35   yeah, sure sounds like it broke the fork, and that noise you have had kinda confirms it if you pull the range box off the side you can look in and see the forks and such, is usually best to replace both synchros when your in there, replace the one fork and the pads on the other, and if there is ANY doubt, replace the shafts, i have seen a couple break, i also like to safety wire the roll pins, had one drop out once you can do it all from the back with lots of patience, some good thick grease to hold the pair of 1/2 rings in the groove, and about 2 extra hands might be nice, but there is no room for them really, just make sure it is clean where you work in case a synchro flies apart, that way you can find all the parts and put it back together sounds like you have the right idea, and much luck, e-mail me if you get in a huge bind and i will do what I can to help - Oh yeah, pay attention to what way the reverse gear goes in so you get it facing the right way first time   [Reply]  [Send Email] cull 11-06-2009 00:13:05 78.143.134.106 20955 Report to Moderator Re: 8360 rc in reply to Blue Buddy, 11-02-2009 16:06:54   Great, thanks for the advise.I'll let you know how i get on.   [Reply]  [No Email] [Show Entire Topic]   [Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply] Hop to: Another Forum Tractor Talk Tool Talk Restoration Tips Paint & Bodywork Implement Alley Tractor Transporting Allis Chalmers Case Combines Crawlers Farmall & IH Ford Ford 9N,2N & 8N Fordson John Deere MH & MF Harry Ferguson Minneapolis Moline Oliver & Cockshutt Garden Tractors Orphans Stationary Engines Today's Tractors Memorabilia Tractor Tales Using Your Tractor Tractor Pulling Site Comments Test Forum Buyer Seller Feedback Kountry Life Classic Trucks