Home | Gallery | Forum | Ads TODAYSTRACTORS.COM
Today's TractorsThe Modern Tractor Resource Page

Featured Photo

Click to View

The Market
Tractor Parts
Older Parts
Tractor Manuals
Classified Ads

Discussion Forum
Forum Archives
Tractor Photos
Implement Photos
Combine Photos
Model Profiles
Safety Issues
Reading Room

Contact Us

Modern Tractor Discussion Board

Topic: Joystick for Ezee On 2070
[Return to Forum]

Author [expand] [Modern View]
Webb Stanley

05-26-2014 07:43:12

Report to Moderator

I recently purchased a 1996 John Deere 2755 which has an Ezee on 2070 Front Loader mounted on it. The hydraulic controls are connected to 4 couplers on the back of the tractors. One hydraulic level controls up and down and another control the tilt. In order to attach any other implements such as a baler the couplers going to the loader tilt have to be disconnected and used for the baler thus making the load useless. Is a Joystick controller kit available for this loader that will fit on the JD 2755 and free up the couplers in the back. If so, where can I obtain one and what would be the approximate cost.

Thanks for your help.

Webb Stanley

[Reply]  [Send Email]
Tx Jim

05-27-2014 05:32:09

Report to Moderator

Re: Joystick for Ezee On 2070 in reply to Webb Stanley, 05-26-2014 07:43:12  
Any good hyd parts place such as Surplus Center or even Northern Tool has a JS control. Be sure and get a closed-center valve or at least a closed center plug. You need to tee JS into rear of pressure control valve on lower RH side of your tractor and route return oil to ported hyd filter cover similar to parts photo. Couldn"t load photo???

  [Reply]  [Send Email]
Webb Stanley

05-28-2014 11:54:58

Report to Moderator

Re: Joystick for Ezee On 2070 in reply to Tx Jim, 05-27-2014 05:32:09  
Thanks Tx Jim. Could you email me the photo
please. webbsaun@hotmail.com


  [Reply]  [Send Email]
Tx Jim

05-29-2014 04:23:55

Report to Moderator

Re: Joystick for Ezee On 2070 in reply to Webb Stanley, 05-28-2014 11:54:58  
Look in your mail box.

  [Reply]  [Send Email]

[Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply]

Hop to:
12-volt conversion kits for the following Ford models: 9N, 2N, 8N, NAA/Golden Jubilee, 600,601 series, 700,701 series, 800,801 series, 900, 2000, 3000, 4000. Contains parts and instructions for updating older 6-volt tractors to 12-volt charging system.    [Click here to visit this Sponsor]


Reproduction of any part of this website, including design and
content, without written permission is strictly prohibited.
Copyright © 1997-2013 TodaysTractors.com

Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.