| Author [expand] |
[Modern View]
|
| warren
12-26-2002 15:38:37
142.177.112.137
5886
|
|
| Darren
02-16-2003 06:26:06
24.222.69.198
6220
|
|
Re: 1983 belarus 250 in reply to warren, 12-26-2002 15:38:37
|
| I have one with a front end loader made by K M W Products L T D FORT ERIE ONTARIO CANADA .Where it fastens on the tractor was done by some one else. It conects ahead of the hitch for the three point hitch under housing.There are two holes there one on each side. IT also bolts on where the transmission and block bolts together at the same place the arms or pipes that hold the front end on .ALL of these connections are made with 3inch angle iron .375 thick . I hope that this may help you some.
Follow Ups:
|
[Reply] [Send Email] |
|
| Tom
12-26-2002 17:39:48
166.102.84.105
5889
|
|
Re: 1983 belarus 250 in reply to warren, 12-26-2002 15:38:37
|
| Depending on who makes the loader, they may attach in different places, but there are loaders that will fit this model
Follow Ups:
|
[Reply] [No Email] |
|
| Tom
12-26-2002 17:39:33
166.102.84.105
5888
|
|
Re: 1983 belarus 250 in reply to warren, 12-26-2002 15:38:37
|
| Depending on who makes the loader, they may attach in different places, but there are loaders that will fit this model
Follow Ups:
|
[Reply] [No Email] |
|
| Rick Sr.
02-28-2003 20:58:30
205.188.208.170
6363
|
|
Re: Re: 1983 belarus 250 in reply to Tom, 12-26-2002 17:39:33
|
| | I have a 1994 250 with a Kelly front loader. Works super for my size tractor(33 hp.) It has a 2000 lb. lift and can be adjusted in hight to load taller trucks. If you want, I can get the info and send it to you (too dark and cold right now) Let me know.
Follow Ups:
|
[Reply] [Send Email] |
|
