jd 7410 blowing key fuses
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by dane shidler on May 22, 2002 at 10:06:44 from (188.8.131.52):
Fuse would blow as soon as I turned the key so i unpluged the wire on the back of the switch that said "ign" and then the fuse was ok until I hooked that wire back up. I looked for any wires that were grounded out and found nothing. After 1 1/2 hours of looking I jumpered the ign acc b+ and fx and it started up. I let it run for 2 min and it died again. Any idea?
|12-volt conversion kits for the following Ford models: 9N, 2N, 8N, NAA/Golden Jubilee, 600,601 series, 700,701 series, 800,801 series, 900, 2000, 3000, 4000. Contains parts and instructions for updating older 6-volt tractors to 12-volt charging system.
[Click here to visit this Sponsor]|
Reproduction of any part of this website, including design and
content, without written permission is strictly prohibited.
Copyright © 1997-2013 TodaysTractors.com
|Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.|