Re: Can I use 1000PTO on a 540 implement at lower RPM?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bus Driver on October 01, 2002 at 17:42:55 from (188.8.131.52):
In Reply to: Can I use 1000PTO on a 540 implement at lower RPM? posted by Keith on September 20, 2002 at 07:16:48:
My tractor has only the 540 speed, but the tachometer is graduated in PTO RPM as well as engine RPM. My engine will run the PTO up to a bit over 700 RPM. Perhaps other tractors are similarly marked on the tach. I must confess that my 6" cutter certainly does do well at about 650 RPM on the PTO. I would think that the 1000 RPM PTO tractors would run well enough with the PTO at 540, that is more than 50% of rated PTO speed and probably more than 50% of full throttle RPM, but it would be important to know at what engine speed that 540 PTO RPM is achieved.
|12-volt conversion kits available for Ferguson Model TO30. Contains parts and instructions for updating older 6-volt tractors to 12-volt charging system.
[Click here to visit this Sponsor]|
Reproduction of any part of this website, including design and
content, without written permission is strictly prohibited.
Copyright © 1997-2013 TodaysTractors.com
|Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.|