Long 460 Hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gary Mckenzie on March 22, 2003 at 08:34:45 from (188.8.131.52):
I'm working on a Long 460 that is "hiccuping" on the lift arms. I have cleaned the strainer, changed the fluid, and replaced the seals on the lift piston. I have also checked the pressure and flow at the remote outlets, both are good. When the lift is raised, it will leak down about 2" and then raise to the original position, it will do this 5-10 times then stop. The amount of correction decreases each time. The arms will leak down 2" when the engine is stopped and then hold overnight. Does anyone have any ideas? Thanks!
|We have the manual you need to repair, service or operate your tractor. These are reprints of the original factory manuals. If you are planning any work on your tractor, you'll appreciate having the manual. Current Special - FREE book offer.
[Click here to visit this Sponsor]|
Reproduction of any part of this website, including design and
content, without written permission is strictly prohibited.
Copyright © 1997-2013 TodaysTractors.com
|Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.|