4840 no hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave Lieber on September 02, 2004 at 21:33:56 from (126.96.36.199):
working on 4840 JD POWERSHIFT, when he brought it to me he had some steering, but when he got to the yard it just about didn't make the corner the steering was gone. put a flow-rator in the main line on the left side of the tractor and have 5 gallons flow, checked transmission pump, and all looks like new, the transmission light does go out when i start it, but if i put any restriction on the flow-rator i loose all my flow. have changed filters, checked sump screen and changed suction line oring on the right side all with no change. also checked all the valves on the left side and none of them are stuck.
sure could use suggestions.
|12-volt conversion kits available for Ferguson Model TO30. Contains parts and instructions for updating older 6-volt tractors to 12-volt charging system.
[Click here to visit this Sponsor]|
Reproduction of any part of this website, including design and
content, without written permission is strictly prohibited.
Copyright © 1997-2013 TodaysTractors.com
|Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.|